BP1000/100 Serie

Bipolar holding electromagnets; IP65

With these solenoids, the magnetic parts are attracted and held when the holder’s internal coil is energised. When the power supply is removed, the part being held is released.

This is a bipolar solenoid with a useful working surface of 1000 mm. The attraction face has an angle of ø120 mm – ø250 mm for working with different parts.The magnetic parts are attracted and held when the internal coil of the holder is energised. When the power supply is removed, the part being held is released. When working with suspended loads, the corresponding safety regulations must be observed.

It may be fed with alternating current via an external rectifier.
It can be manufactured with any duty cycle, voltage, connections, etc. or in other sizes for different applications.
Grounding is recommended if the metal parts are accessible.

Maximum holding forces

øsolid bar (mm)	Force N/mm	Force N(for a bar of =>1000mm)
ø120-ø200	5.4	5400
ø250	8	8000

RELATED PRODUCTS

High-performance linear solenoids

ERC serie

High mechanical performance open-frame linear solenoids. Optional spring return.

Simple effect linear solenoids

ER serie

Linear solenoids. Optional spring return

Electromagnetic safety locks

C30

This bolt is locked without voltage, the locking is made by an incorporated spring. With an electrical signal the bolt turns to unlocked. The key has two positions, in the locked position the key cannot be removed. To remove it, it is necesary to
unlock the bolt.

Electromagnetic safety locks

ERB35-05/NDBCP

This locking bolt is double coil bistable solenoid, where the stroke movement from initial (unlocked) to final position (locked) is made by electromagnetic forces when coil 1 is feeded. The return to initial positions takes place by an inverse polarizing pulse (when coil 2 is feeded) combined with an incorporated spring.